• PC-3000 Express/UDMA-E/Portable Ver. 6.7.20 2020-06-09
  • PC-3000 SAS Ver. 6.7.12 2020-06-09
  • Data Extractor Ver. 5.10.12 2020-06-09
  • Data Extractor RAID Edition Ver. 5.10.12 2020-06-09
  • PC-3000 SSD Ver. 2.8.5. 2020-06-09


PC-3000 HDD (Express, UDMA, Portable)

WD Marvell

  • Added the decryption of user data function for new families (SpyGlass, Palmer, etc.);
  • Added ROM building from SA data for Palmer family (it’s now possible to use "unlocked" PCB without re-soldering the ROM);
  • Added Heads map changing in RAM feature for SpyGlass and Palmer families;
  • Added Heads map building option for SpyGlass and Palmer families.

Seagate F3

  • Added a Master of complex HDD initialization;
  • Loader uploading with Disk FW and patching on the fly:
    • Init SMART Fail;
    • NoHOST-BSY 1/2;
    • WrProtect 87270000;
    • LOD check Err xxxx0800.

Data Extractor

  • Replaced application memory manager. This manager is significantly faster, and, which is especially important for a long-running application, allocates memory of various size more optimally, which reduces the likelihood of memory fragmentation due to different allocation “lifetime”. The use of this manager significantly reduces the likelihood of misleading errors that show the lack of memory;
  • Added the ability for USB devices, that are not connected through the utility, to apply hardware and software resets and include them in scripts.

"Quick Disk Analysis" mode

  • Added search APFS partitions.

Virtual disk, encrypted FileVault

  • Added support for disks without EncryptedRoot.plist.wipekey file.

File systems


  • Added initial support for APFS file system;
  • Encrypted volumes are now supported.

PC-3000 SSD

Phison controller utilities

  • AS2258 controller chip drives (AMD Radeon R5, Qumo Novation 3D) are now supported.

PS3111 controller utility

  • Renewed list of loader.

Silicon Motion controller utilities

  • SM2236G (KingSpec PA25) is now supported.

SanDisk Marvell controller utility

  • Added support for WD Blue SSD (Marvell 88ss1074);
  • Added the extended mode for the following family drives:
    • Helen: X300, Ultra II (88ss9190);
    • Venus: Ultra II (88ss1074).

07.09.2016 Silicon Motion (SSD 2.3.0)


     PNY CS1111;


      AMD Radeon R3, ADATA SP550.



07.09.2016 Marvell VanGogh (SSD 2.2.7)

   - исправлена ошибка в некоторых случаях приводящая к неверному сохранению микропрограммы Firmware у накопителей


     серии M500, M550, MX100, MX200

  • April 22, 2016 New software version PC-3000 SSD Ver. 2.0.3 is available now
    Samsung SSD
    • The 850 Series (850 PRO) family is now supported
    • The CM871 family is now supported
    • For the 840 EVO family, the miniSata and M.2 interfaces are now supported
    • The DXT43L0Q_LD Loader has been added for the 840 Series SSDs
    • The support of the MLC SSDs based on TSOP-56 microchips has been added

    Marvell Van Gogh SSD
    • New families are now supported:
      - Crucial M550
      - Crucial MX100
      - Crucial MX200
    • The "Refresh TCG Tables" test for Micron C400 SSDs has been added
    • The following new tests are available now:
      - Resources Backup
      - Read/Write ROM
      - Read/Write microcode
      - Read/Write SA modules
  • Samsung SSD
    • The 840 EVO family is now supported 850
    • The following enhancements have been made for the 470 and 830 families:
      - Improved translator building algorithms;
      - New loaders added;
      - Apple SSD of the the 470 and 830 families are now supported.
    • The following enhancements have been made for the 840/840 PRO/840 EVO families:
      - Improved loader algorithms;
      - Improved algorithm of checking and reading memory chips in the loader;
      - Improved algorithm of memory chips reading in the utility;
      - Support of the 512 Gb drives (840/840 PRO);
      - Capability of hardware decryption for reading by logical sequence;
      - Improved algorithm of translator building for the 840/840 PRO family drives.
    • General changes of the utility:
      - Loader type can now be selected manually;
      - Memory chip information has been added into the "Utility Status" menu;
      - The window of family selection has been changed. Now the family can be selected by microprogram version and controller type.

    OCZ Barefoot 3
    • New families are now supported:
      - OCZ Vector 150;
      - OCZ Vector 180;
      - OCZ Vertex 460;
      - OCZ Vertex 460A;
      - OCZ Arc 100;
      - AMD Radeon R7.
    • New tests have been added:
      - Low-level formatting;
      - "Clear S.M.A.R.T.";
      - Defect table report;
      - Trasfer of G-List into P-List.
    • New functionality:
      - Autodetect procedure for the drives in the “Safe" mode;
      - Clear password option for the drives in the "Safe" mode;
      - SMART attributes decoding;
      - Improved Defect Tables search algorithm.
  • Data Extractor Ver.5.5.7 11.01.2017
  • Data Extractor RAID Edition Ver.5.5.7 11.01.2017
  • PC-3000 Flash software Ver. 7.0.4 11.01.2017